Sök:

Sökresultat:

12701 Uppsatser om Lean material flow - Sida 1 av 847

Flödesoptimering på sjukhuslaboratorium: En praktisk implementering av lean

This study has investigated the possibilities of implementing lean in a division of a hospital in Stockholm. The goal was to reduce the lead time for the patient to get his diagnose by implementing lean in the two production flows of this division. In order to accomplish it, a complete map over the value stream has been done. With the help of the value stream map and lean theory a list over the processes in contradiction with lean has been made. Finally propositions to implement lean and by this way reduce the lead times in this stream have been made out.

Flödesanalys av plåtsammansättning : Strävan mot Just-In-Time och minskat slöseri

The Volvo Trucks plant in Umeå is a highy complex manufacturing facility where the same production line handles a variety of different models. This require flexible and agile processes with high quality standards. This thesis studies the flow of material through a production line and how Volvo can use their existing manufacturing monitoring system to optimize the flow of materials.The goal with the thesis is to identify eventual problems with the flow of materials and to deliver a few proposals on how the production line can improve its productivity. The theory of LEAN, Just-In-Time and Supply Chain Management serves as the scientific reference to this project. By analyzing the flow of material, performing interviews and observing the processes a few problems are identified.

Från frihet till fängelse: En studie av klientflödet på Häktet Kronoberg

In the last decades, lean production has proven to be one of the most important organizational paradigms in manufacturing. The lean concept has also spread into the service industry where it is applied within a range of different areas. The wide applicability of lean principles has spurred the authors of this study to apply the principles in the context of the operations of a Swedish remand prison. The thesis examines the process a client of the remand prison Häktet Kronoberg goes through from the time of arrest until he/she is released or convicted and transferred to jail. Based on lean tools and principles, the thesis maps and analyses this process.

Noble Operations: En studie av Stadshuskällarens processflöden

The aim of this thesis is to study Stadshuskällaren?s operational processe flow and identify their operational characteristics. The uniqueness of Stadshuskällaren is that they are breaking the law of trade-offs regarding volume/variety, much like Toyota managed to do ? which spawned the entire field of research of the ?Lean Philosophy?. In the thesis the characteristics we identify through analysis, which enables Stadshuskällaren to break the trade-off, are compared with the principles of Lean service theory, which ultimately stem from Toyota.

Kategorisering av faktorer som påverkar flödeseffektivitet - En fallstudie på Capio St Görans Sjukhus

Swedish healthcare is in continuous need of cost savings and efficiency improvements in order to meet the increased demand for care. The theories of lean, developed from the industry, are applied more frequently on healthcare systems to increase effectiveness and reduce waiting times in patient processes. However, some processes seem to be more successful in their lean implementation than others. In this thesis, factors influencing flow efficiency in lean healthcare are examined. Through interviews with the top executive board at Capio St Göran's hospital, data is collected in order to analyze reasons for success.

En rörig historia : en fallstudie över Secorocs processflöde av DTH-rör

Abstract Title: A messy story ? a case study of Secorocs process flow of DTH-pipes Presentation date: 2010-06-02 Course: Bachelor thesis in businessAuthor: Kristoffer ForsmanAdvisor: Kjell GustafssonKeywords: Management control, process control, lean production, process flow analysisPurpose: The purpose of this bachelor thesis is to develop an overview of the process flow for a specific product, and with the help of this mapping based on a lean production philosophy show possible improvement proposals and how these can lead to a more efficient process flow.Methodology: I have used a case study of Secorocs DTH-pipes and my primary data are gathered through interviews and observations. I have used theoretical framework to establish a process flow analysis. This is to obtain data on process activities and whether they are creating value or not. This leads to a current mapping of the situation in Secoroc on DTH-pipes and then analyzed and suggestions for improvement are developed.Conclusions: That by using the above mentioned mapping of process flow of DTH-pipes, problem areas could be illustrated.

Att arbeta smartare en fallstudie om teorier och modeller inom Lean kan tillämpas i akutsjukvården

The emergency medical care in Sweden has been under persistent debate, due to factors such as long waiting hours, inefficient patient flow, and understaffed departments. In an effort to meet the critique and with a willingness to improve the problems, an increasing amount of emergency clinics are adopting theories and models within Lean. Positive outcomes are evident, there has been some criticism directed towards Lean. Among these is the argument that in order for Lean to be successful it needs to be used within standardized and foreseeable processes, and that it therefore only is applicable to those kind of processes found within industrial production. This prompted the question of whether Lean was a suitable strategy within emergency medical care, considering the large variation of patients and non-foreseeable processes that in fact share little resemblance to that of industrial production.

Resurssnåla materialflöden - En fallstudie på Volvo Powertrain

From the customer?s perspective the only reason for a firm to exist is the value it creates. However, a problem within manufacturing companies is that of the total lead time, only a small part can be considered as value adding. It has further been discovered that when working with improvements businesses often sub-optimizes single processes instead of considering what benefits the entire company. Thus, when improving processes and activities it is important to have knowledge about and understand which factors that affect how the flow can be designed.Several studies have been performed with a wide perspective on process flows in order to obtain a more resource-efficient and value added flow.

Reducering av ledtid genom en värdeflödesanalys En fallstudie på Lammhults Möbel AB

The purpose of this study is to increase the understanding of activities, flows and waste in a company's production process. By performing a value stream analysis, non-value adding activities are identified in a production process and then the suggested improvements that can reduce lead times will be stated. The value-stream mapping identifies the flow of information and the flow of material in a production process and this provides the basis for the identification of non-value adding activities.We conducted the study at Lammhults Möbel AB in Lammhult Sweden, where the production flow of Spira-21 has been investigated. This to identify any non-value adding activities that affect the flow negative and consumes time and money in a non-value adding way.A reasonable approach for the project was taken by studying the methodologies and theories. We conducted interviews and site surveys at Lammhults Möbel AB where the flow of information and material in the production process were investigated.

Kundutredning av deltagande företag i IndustriForums Lean krAft utbildning 2005-2006

This essay is an enquiry about how companies as participated in a Lean pro¬duction education use this education. The essay describes also how one works with the implementation of Lean production and how they believe that they will work. The enquiry tries to create an advisory material for other companies that are in the beginning of implementing their own Lean production systems. There these companies? gets a picture of how other companies have done during their try to create a functioning Lean production system.

Kartläggning av truckflöden på Primary Products : Ur ett Lean Production perspektiv

The Transport division is responsible for the internal transports on Sandvik MaterialTechnology AB. At the moment there is no clear picture of how the straddle carriers aremoving at the division Primary Products and if it is working in a satisfying way. It isimportant to see the whole picture of the transportation flow so improvements can be made.The purpose of this essay is to survey and analyse the truck flow in a Lean Productionperspective. The essay is delimited to only include straddle carriers transportation ways in thePrimary Products division. To survey the truck flow we have used a method called Walkthrough.This means that we have walked thorough the whole production flow andinterviewed some of the employed on the way to get the necessary information.

Effektivisering av destruktionsprocess : En förstudie om hur Fresenius Kabi kan effektivisera befintlig destruktionsprocess

This thesis is a feasibility study into how Fresenius Kabi may rationalize their destruction process in regards to cost, recycling, and work environment. The two main objectives are to identify scrap flows and the possibility to improve or replace the equipment that is now carrying out the physical scrapping. The flow has been visualized by a flow chart of the material and communication. A chart of the problem established to visualize where improvements are necessary. Based on the problems proposals are presented on how to improve the flow thru the plant.During analyze of the physical scrapping equipment it was also necessary to take a deeper look at how they are carrying out there work today, how does the procedure look like, working environment and where are the weaknesses.

Planering & produktionsstyrning : Lean filosofin vid produktion av asfalt

Lean is a production philosophy which is about increased resource use while meeting customer requirements. The foundation of lean comes from Toyota and their production philosophy The Toyota Way. Professor Jeffrey k. Liker has worked with Toyota's production philosophy and Lean for a long time and has created a 4 P model and 14 principles that characterize the Toyota production system (TPS), which many sources refer to.The aim of my work is to study the working procedure of asphalt projects from sales to the laid asphalt with a focus on planning and production management. The goal is to examine how the lean philosophy can be applied in planning and production to simplify the flow of asphalt projects based on Likers model and principles.

SEB Way  : -vill man vara Lean får man lida pin?

Syftet med den här studien är att undersöka hur lean fungerar inom banksektorn och mer specifikt inom Skandinaviska Enskilda Banken (SEB) som vi valt att studera ingående..

Lean Product Development - Will it deliver products faster, better and cheaper?

Abstract Tutor - Anders Richtnér History - Theories suggest that Lean Product Development strategies dramatically increase a company's performance through enabling faster T-T-M, Quality and Costs of Product Development. Purpose - The purpose of this paper is therefore to investigate whether the implementation of LPD actually affect corporate performance measurements T-T-M, Quality and Cost, in a positive way. Methodology - This Bachelor thesis is an exploratory investigation of the concept of Lean Product Development within a global IT- company, performed through four case studies, interviews and complementing corporate performance data. Findings - With empirical data and subsequent analyzes in mind, we note the following; it is clear that the project that produced the best results, in terms of T-T-M, Quality and Cost, also was the one furthest in the process of implementing Lean Product Development..

1 Nästa sida ->